Design Grid

In the design grid, you can:

  • Add and delete rows, columns, and sections.

  • Enter data fields, text, and formulas.

  • Drag and drop fields into different sections, rows, or columns.

screen.sectionsmeny.png 

Sections

Sections dictate how the data appears in a report. There are five types of sections: page, report, details, group, and repeating group.

 Page Header &  Page Footer

The rows in the Page Header section appear at the top of every page of a report, and the rows in the Page Footer section appears at the bottom of every page of a report. Typically, the Page Header section is used to designate column headers for a report, and the Page Footer section is used to display the page number and/or confidentiality notices for a report. 

Page Headers and Page Footers are not intended to perform calculations or display data fields. For this reason, a Page Header populated with a data field will only return the first line of data in that field; a Page Footer will return only the last line of data.

Note: If you are printing a report, remember that Excel outputs do not have pages. Page Headers will appear only once at the beginning of the report. Reports run via the Report Viewer will display Page Headers similarly unless ‘Simulate PDF’ is checked in the Options menu.

 Report Header &  Report Footer

The rows in the Report Header appear at the beginning of a report. Typically, these rows display the title of a report. The rows in the Report Footer appear at the end of a report. Typically, the Report Footer displays grand totals and summary information for the report.

 Detail

The Detail section is the main section of most reports. When the report is executed, the Details Section creates a row for each element in the Data Categories. For example, if the Detail section contains the Data Field Orders.OrderId, the report will display each Order Id on a separate row.

 Group Header &  Group Footer

Group Header/Footer sections require a sort on a Data Field. The rows in a Group Header section will appear above the Detail section for each unique value of the sorted Data Field. Typically, Group Header sections are used to display data as labels. For example, a report may contain a Group Header on Orders.OrderDate and display Orders.OrderId in the Detail section. The output would display each date with orders that occurred on that date below them.

The rows in a Group Footer section will appear below the Detail section for each unique value of the sorted Data Field. Typically, Group Footer sections are used to calculate subtotals. For example, a report may contain a Group Footer on Orders.OrderDate which displays the number of orders made on each date.

Note: Group Header/Footer sections can also be set to display rows for each value of a formula instead of a Data Field. (Ex. The report may be sorted on the Data Field Orders.OrderDate, but the report should show subtotals for each month. A Group Footer on the formula =Month({Orders.OrderDate}) will display rows containing subtotals for each month.)

 Repeating Groups

Repeating Groups require a sort on a Data Field. Repeating Groups have their own header, detail, and footer subsections. Repeating Groups should only be used when the data has multiple one-to-many relationships and each should be rendered completely before the other.

For example, each Professor can teach multiple classes and advise multiple students. For each professor you want to see all the classes they teach and then all the students they advise.

Using Sections

Sections can be added, deleted, modified, moved, and assigned shading.

Adding Sections

  1. Click anywhere in the Section Column.

  2. Hover your mouse over Add Section, then select the type of section you would like to add.

Deleting Sections

  1. In the Section Column, click on the section you want to delete.

  2. Click ‘Delete Section’.

Modify Sections (Group Header/Footers and Repeating Groups only)

  1. In the Section Column, click on the section you want to modify.

  2. Click Modify Section. This will bring up a Modify Group Section Menu.

  3. Select from the dropdown the desired Data Field for the group to use.

  4. Click OK.

Section Shading

  1. In the Section Column, click on the section that you want to Shade.

  2. Click Section Shading. This will bring up a menu.

  3. Click New to add a color to the shading.

  4. Click the color box to select a color or enter a hex value.

  5. Click OK.

screen.sectionshading.png

Columns and Rows

Columns and rows of cells can be added, modified, or removed as described below.

Columns

  • To select a group of columns, hold the SHIFT key and then click the beginning and ending column.

  • Non-contiguous columns can be selected by holding the CTRL key and clicking the desired columns.

  • A column can be resized by dragging its right edge horizontally.

  • Clicking on a column (or selected group) will display a menu where you can:

    • Insert a new column.

    • Delete the selected column.

    • Set its width to be identical with the other selected columns.

    • Hide the selected column.

    • Set Column Info to make the label the column and/or make it sortable within the Report Viewer.

screen.columnsmeny.png

Sorting by Columns within the Report Viewer

While viewing reports in the Report Viewer, a user can click the bar at the top of the report to sort by a column. For Express Reports, this is handled automatically but must be enabled for Advanced Reports.

To make a column sortable:

  • Click on the column and select 'Column Info…'

  • Provide the column with a label that will appear in the Interactive Report Viewer Dock.

  • From the Sort dropdown select the Data Field to be used for sorting, or provide a formula by clicking the formula button (

    ).

Note: Column Sorts are applied after any sorts defined in the Sorts Menu.

screen.columninfo.png 

  • Click on the column again to set a default sort direction.

screen.columnsort.png

Rows

  • To select a group of rows, hold the SHIFT key, then click the top and bottom rows of the area you wish to select.

  • Non-contiguous rows can be selected by holding the CTRL key and clicking the desired rows.

  • A row can be resized by dragging its bottom edge vertically.

  • Clicking on a row (or selected group) will display a menu where you can:

    • Insert a new row.

    • Delete the selected row.

    • Set the row's height to be automatically controlled.

    • Suppress the row from appearing on the report.

    • Insert a page break.

screen.rowmenu.png

Cells

Cells are the containers for all the information in a report. Cells may contain text, images, charts, or links to other reports.

  • To enter text into a cell, double-click the cell, and a text field will appear.

  • To select cells, either click or use the arrow keys.

  • Groups of cells can be selected by holding the SHIFT key and clicking on another cell. All the cells in-between the two will be selected.

  • Non-contiguous cells can be selected by holding the CTRL key and clicking the desired cells.

  • A cell can be copied by holding the CTRL key, then dragging and dropping it into a new cell.

  • Adjacent cells can be merged and unmerged using the Merge/Split Cell 

    screen.cellmerge.png

     buttons in the Toolbar.

Using Page Breaks

For a Page Break to occur at the beginning of each element of a Data Field, place a page break on the top row of Group Header Section for that Data Field. See Sections for more detail on Group Header Sections.

screen.pagebreak.png

Creating Collapsible Rows

A Group Section can be set to display as collapsed by default on HTML export. This causes the contents of the section to be suppressed and individually expandable for each change in Header. Collapsible rows are supported in the standard or Interactive HTML viewer. Non-HTML export formats will ignore Collapsible Rows.

screen.collapse_example.png

Left-click on an arrow next to a Collapsible Row to expand or collapse the group. 

screen.expand_example.png

Right-click on an arrow next to a Collapsible Row to see additional display options:

  • Expand will expand the selected top-level group. This elicits the same behavior as left-clicking an arrow.

  • Collapse will collapse the selected top-level group. The state of the sub-groups is preserved.

  • Expand Group will expand the selected top-level group and all sub-groups within that group.

  • Collapse Group will collapse the selected top-level group and all sub-groups within that group.

  • Expand All will expand every group and sub-group on the page.

  • Collapse All will collapse every group and sub-group on the page.

To create a collapsible row, click on the desired row number in a Group Header Section and select Collapse Rows in the dropdown menu.

screen.collapsemenu.png

Properties of a Collapsible Row

Collapsible Rows have the following properties when exported to HTML:

  • Collapsible Rows display as collapsed whenever the Report is exported or altered using Interactive HTML.

Note: Collapsed or expanded states cannot be saved to the Interactive HTML User Report preferences.

  • Page Breaks below a collapsed row are ignored. Expanding a collapsed group will not alter the Report pagination.

  • The contents of a collapsed group are searchable by the HTML search tool.

Search